Skip to content
Description

Will this work in your space?

You need:

  • 9–10 ft ceiling — the unit mounts overhead, 21–25 inches in front of the tee
  • 10–12 ft from the golfer to the screen
  • 14 ft of swing clearance around the hitting position
  • Solid ceiling structure to carry 22 lbs

Ceiling height is the gate on this one. If you're under 9 feet, this isn't your launch monitor and I'd rather tell you now. Send me a photo and your ceiling height at 931-278-5630 and I'll confirm the fit before you spend anything.


What it is

APOGEE mounts overhead and reads the ball with cameras. No marked balls, no dots on your clubs, no lining anything up before you swing. You grab a ball out of the tray and hit it.

Because it's ceiling-mounted, it doesn't care whether you're right or left handed — nobody moves anything between players. That matters more than it sounds like it should if two people are going to use the room.

It also ships with a one-year E6 by TruGolf ENJOY subscription, which covers 15,000+ courses, practice ranges, club fitting, bag mapping, and online play. That's a real chunk of value bundled in — most monitors at this level leave you to sort software out separately.

Who it's for: Golfers building a dedicated room with the ceiling height to support it, who'd rather set it up once and forget about it than fiddle with placement every session.

Who it isn't for: If your ceiling is under 9 feet, or if you're planning to move the unit between rooms, a floor-standing or side-mounted monitor is the better call. This one's meant to live in one place.


What I'd tell you if you called

The ceiling mount is the whole job. Twenty-two pounds hanging over your head needs real blocking between joists, not drywall anchors. This is the part people underestimate, and it's the part I'd handle for you.

Budget for the PC. E6 2026 wants an i7 10th gen or newer, 24GB of RAM, and an RTX 3060 with 12GB. That's a real machine, not a laptop you already own. E6 Connect runs on less — Windows 10, i5, 8GB, a 1070 — so there's a lighter path if you're not chasing max settings.

Club face angle has an asterisk. Some lighting setups and club finishes need a small metallic sticker for accurate face angle data. Stickers come in the box. Everything else reads off the ball, so your trajectory data is unaffected either way.

Plan the mount before you frame. If your room isn't built yet, tell me. Blocking for a ceiling mount costs almost nothing during framing and turns into cutting drywall later.


Data it tracks

Ball speed · Back spin · Side spin · Vertical launch angle · Horizontal launch direction · Club head speed · Club face angle · Club path


What's in the box

  • APOGEE launch monitor
  • Ceiling mount and mounting hardware
  • Calibration template
  • Laser level
  • Power cable and CAT6 cable
  • Club stickers
  • Installation manual
  • E6 by TruGolf ENJOY subscription (1 year)

Specs

Dimensions 38" W × 8" D × 5.5" H
Weight 22 lbs
Mount height 9–10 ft from floor
Tee offset 21–25 in front of tee
Compatible software E6 (2026), E6 Connect

Shipping

Ships direct from the manufacturer, worldwide.


In Middle Tennessee? I don't just ship it — I'll mount it, block the ceiling properly, and get it calibrated before I leave. Free space assessment anywhere within 90 minutes of Clarksville.

931-278-5630

Thanks for choosing Cornerstone Golf. I'm one person who loves this stuff and wants to help you do it right — whether you build it yourself or have me install it here in Middle Tennessee. Every product I carry is chosen because it works, and if you're ever unsure, just reach out. I'd rather help you find what fits than sell you what doesn't. Let's talk.

APOGEE by TruGolf Launch Monitor — Ceiling-Mounted, No Marked Balls

Sold out
$8,089.95
  • Authorized dealer. New stock through the manufacturer's distributor with full warranty — not a grey-market marketplace listing.
  • Free room check before you buy. Send me your ceiling height and I'll tell you if this fits — or that it doesn't.
  • Install available in Middle Tennessee. Licensed and insured, roughly 90 minutes around Clarksville. Ships anywhere in the US.
  • Questions before you buy? Call or text (931) 278-5630. You get me, not a call center.
Accessories

Will this work in your space?

You need:

  • 9–10 ft ceiling — the unit mounts overhead, 21–25 inches in front of the tee
  • 10–12 ft from the golfer to the screen
  • 14 ft of swing clearance around the hitting position
  • Solid ceiling structure to carry 22 lbs

Ceiling height is the gate on this one. If you're under 9 feet, this isn't your launch monitor and I'd rather tell you now. Send me a photo and your ceiling height at 931-278-5630 and I'll confirm the fit before you spend anything.


What it is

APOGEE mounts overhead and reads the ball with cameras. No marked balls, no dots on your clubs, no lining anything up before you swing. You grab a ball out of the tray and hit it.

Because it's ceiling-mounted, it doesn't care whether you're right or left handed — nobody moves anything between players. That matters more than it sounds like it should if two people are going to use the room.

It also ships with a one-year E6 by TruGolf ENJOY subscription, which covers 15,000+ courses, practice ranges, club fitting, bag mapping, and online play. That's a real chunk of value bundled in — most monitors at this level leave you to sort software out separately.

Who it's for: Golfers building a dedicated room with the ceiling height to support it, who'd rather set it up once and forget about it than fiddle with placement every session.

Who it isn't for: If your ceiling is under 9 feet, or if you're planning to move the unit between rooms, a floor-standing or side-mounted monitor is the better call. This one's meant to live in one place.


What I'd tell you if you called

The ceiling mount is the whole job. Twenty-two pounds hanging over your head needs real blocking between joists, not drywall anchors. This is the part people underestimate, and it's the part I'd handle for you.

Budget for the PC. E6 2026 wants an i7 10th gen or newer, 24GB of RAM, and an RTX 3060 with 12GB. That's a real machine, not a laptop you already own. E6 Connect runs on less — Windows 10, i5, 8GB, a 1070 — so there's a lighter path if you're not chasing max settings.

Club face angle has an asterisk. Some lighting setups and club finishes need a small metallic sticker for accurate face angle data. Stickers come in the box. Everything else reads off the ball, so your trajectory data is unaffected either way.

Plan the mount before you frame. If your room isn't built yet, tell me. Blocking for a ceiling mount costs almost nothing during framing and turns into cutting drywall later.


Data it tracks

Ball speed · Back spin · Side spin · Vertical launch angle · Horizontal launch direction · Club head speed · Club face angle · Club path


What's in the box

  • APOGEE launch monitor
  • Ceiling mount and mounting hardware
  • Calibration template
  • Laser level
  • Power cable and CAT6 cable
  • Club stickers
  • Installation manual
  • E6 by TruGolf ENJOY subscription (1 year)

Specs

Dimensions 38" W × 8" D × 5.5" H
Weight 22 lbs
Mount height 9–10 ft from floor
Tee offset 21–25 in front of tee
Compatible software E6 (2026), E6 Connect

Shipping

Ships direct from the manufacturer, worldwide.


In Middle Tennessee? I don't just ship it — I'll mount it, block the ceiling properly, and get it calibrated before I leave. Free space assessment anywhere within 90 minutes of Clarksville.

931-278-5630

Before you buy

Will this actually fit your room?

The number one reason this stuff gets sent back is that it didn't fit. Send me your measurements and I'll tell you straight — including if the answer is no. Costs nothing, and you don't have to buy it from me.

Three numbers is all I need

Width Wall to wall
Ceiling height Floor to the lowest thing up there
Depth Screen to where you'd stand

Not sure how to measure around a garage door track or a low beam? Send a photo instead — that works just as well.

Call or text (931) 278-5630

Straight to me. I work days, so evenings and texts get the fastest reply.

Send me your room and I'll check the fit

Your room

Goes straight to my inbox. No newsletter, no follow-up sequence.

Why buy it here

Same price as the big sites. Different service.

Manufacturers set these prices, so nobody is cheaper. What changes is what you get with it.

You get me, not a call center

One phone number, and I answer it. If you text me about throw distance at 9pm, you get an answer, not a ticket number.

I build these rooms myself

Ten years in construction around Clarksville. The advice you get here comes from framing these, not from reading a spec sheet.

Authorized dealer, real warranty

New stock through the manufacturer, full warranty, proper support. Not a marketplace listing from who-knows-where.

Install across Middle Tennessee

Licensed and insured, roughly 90 minutes around Clarksville. Ships anywhere in the US — install is the local part.

Outside Middle Tennessee? You still get the free room check and the honest answer. I just can't swing the hammer.

Straight answers

Questions I get asked a lot

That depends on three numbers: your ceiling height, your room width, and how far back you can stand. Send me those and I'll tell you before you spend anything. It's the most common reason gear goes back, and it's completely avoidable.

Within about 90 minutes of Clarksville, yes — I'm licensed and insured and I do the build myself. Outside that radius I'll still help you plan it and tell you what to ask a local contractor for.

Small items ship like normal parcels. Enclosures, screens and mats are made to order and ship freight, which takes longer — your delivery date shows in the cart before you pay. If you have a date in mind, order early and tell me about it.

Made-to-order screens and enclosures generally can't be returned, which is exactly why I offer the free room check first. Take me up on it. Full terms are in the Shipping & Returns tab above.

Because the manufacturers set it. Every authorized dealer sells at the same price, and anyone well below it is either grey market or not going to honour a warranty. What you're choosing between is who helps you when something goes wrong.

Usually yes — a simulator bay is a few pieces working together, and the wrong combination is where money gets wasted. Tell me what you already own and I'll tell you what's missing and what isn't worth buying.

Next step

Not sure it'll fit? That's the first thing I check.

Send me your ceiling height, width and depth. I'll tell you what works and what won't — no charge, whether you buy from me or not.

Call or text (931) 278-5630See how I build them

Dealer for The Net Return, Carl's Place and GolfBays.

Description

Will this work in your space?

You need:

  • 9–10 ft ceiling — the unit mounts overhead, 21–25 inches in front of the tee
  • 10–12 ft from the golfer to the screen
  • 14 ft of swing clearance around the hitting position
  • Solid ceiling structure to carry 22 lbs

Ceiling height is the gate on this one. If you're under 9 feet, this isn't your launch monitor and I'd rather tell you now. Send me a photo and your ceiling height at 931-278-5630 and I'll confirm the fit before you spend anything.


What it is

APOGEE mounts overhead and reads the ball with cameras. No marked balls, no dots on your clubs, no lining anything up before you swing. You grab a ball out of the tray and hit it.

Because it's ceiling-mounted, it doesn't care whether you're right or left handed — nobody moves anything between players. That matters more than it sounds like it should if two people are going to use the room.

It also ships with a one-year E6 by TruGolf ENJOY subscription, which covers 15,000+ courses, practice ranges, club fitting, bag mapping, and online play. That's a real chunk of value bundled in — most monitors at this level leave you to sort software out separately.

Who it's for: Golfers building a dedicated room with the ceiling height to support it, who'd rather set it up once and forget about it than fiddle with placement every session.

Who it isn't for: If your ceiling is under 9 feet, or if you're planning to move the unit between rooms, a floor-standing or side-mounted monitor is the better call. This one's meant to live in one place.


What I'd tell you if you called

The ceiling mount is the whole job. Twenty-two pounds hanging over your head needs real blocking between joists, not drywall anchors. This is the part people underestimate, and it's the part I'd handle for you.

Budget for the PC. E6 2026 wants an i7 10th gen or newer, 24GB of RAM, and an RTX 3060 with 12GB. That's a real machine, not a laptop you already own. E6 Connect runs on less — Windows 10, i5, 8GB, a 1070 — so there's a lighter path if you're not chasing max settings.

Club face angle has an asterisk. Some lighting setups and club finishes need a small metallic sticker for accurate face angle data. Stickers come in the box. Everything else reads off the ball, so your trajectory data is unaffected either way.

Plan the mount before you frame. If your room isn't built yet, tell me. Blocking for a ceiling mount costs almost nothing during framing and turns into cutting drywall later.


Data it tracks

Ball speed · Back spin · Side spin · Vertical launch angle · Horizontal launch direction · Club head speed · Club face angle · Club path


What's in the box

  • APOGEE launch monitor
  • Ceiling mount and mounting hardware
  • Calibration template
  • Laser level
  • Power cable and CAT6 cable
  • Club stickers
  • Installation manual
  • E6 by TruGolf ENJOY subscription (1 year)

Specs

Dimensions 38" W × 8" D × 5.5" H
Weight 22 lbs
Mount height 9–10 ft from floor
Tee offset 21–25 in front of tee
Compatible software E6 (2026), E6 Connect

Shipping

Ships direct from the manufacturer, worldwide.


In Middle Tennessee? I don't just ship it — I'll mount it, block the ceiling properly, and get it calibrated before I leave. Free space assessment anywhere within 90 minutes of Clarksville.

931-278-5630

Thanks for choosing Cornerstone Golf. I'm one person who loves this stuff and wants to help you do it right — whether you build it yourself or have me install it here in Middle Tennessee. Every product I carry is chosen because it works, and if you're ever unsure, just reach out. I'd rather help you find what fits than sell you what doesn't. Let's talk.