Authorized dealer · Ships freight & parcel Free space assessment anywhere in Middle Tennessee Hablo Español — llámame y lo hablamos
Call or text (931) 278-5630
Skip to content
Description

Foam Triangle Wedge Protection Pelmet

Finish off your simulator with the Foam Triangle Wedge Protection Pelmet

Tired of chasing stray golf balls that disappear under your impact screen? Whether you’re hitting into a high-end enclosure or a DIY setup, that small gap at the floor is a magnet for low-fliers and "worm-burners."

Foam Gap Wedge is the simple, professional solution designed to seal the perimeter and protect both your equipment and your sanity.

Why You Need It

  • Stop the Bounce-Back: Prevents balls from hitting the floor frame or back wall, reducing unpredictable ricochets..

  • Clean Professional Look: Fills the unsightly gap between the turf and the screen for a seamless, "built-in" simulator appearance.

Key Features

  • High-Density Impact Foam: Absorbs energy instantly. It’s tough enough to take a direct hit from a driver but soft enough to protect your floor and screen.

  • Perfect Geometry: The 45-degree triangle profile is engineered to deflect low shots back toward the hitting mat safely.

  • Universal Fit: Fit any simulator width or to notch around corner poles.

  • Easy Installation: Simply slide it into place. The friction-fit design stays put, or you can use the included adhesive strips for a permanent, "no-shift" setup.

Thanks for choosing Cornerstone Golf. I'm one person who loves this stuff and wants to help you do it right — whether you build it yourself or have me install it here in Middle Tennessee. Every product I carry is chosen because it works, and if you're ever unsure, just reach out. I'd rather help you find what fits than sell you what doesn't. Let's talk.

Foam Triangle Wedge Protection Pelmet

Foam Triangle Wedge Protection Pelmet

$279.99
  • Authorized dealer. New stock through the manufacturer's distributor with full warranty — not a grey-market marketplace listing.
  • Free room check before you buy. Send me your ceiling height and I'll tell you if this fits — or that it doesn't.
  • Install available in Middle Tennessee. Licensed and insured, roughly 90 minutes around Clarksville. Ships anywhere in the US.
  • Questions before you buy? Call or text (931) 278-5630. You get me, not a call center.
Size

Foam Triangle Wedge Protection Pelmet

Finish off your simulator with the Foam Triangle Wedge Protection Pelmet

Tired of chasing stray golf balls that disappear under your impact screen? Whether you’re hitting into a high-end enclosure or a DIY setup, that small gap at the floor is a magnet for low-fliers and "worm-burners."

Foam Gap Wedge is the simple, professional solution designed to seal the perimeter and protect both your equipment and your sanity.

Why You Need It

  • Stop the Bounce-Back: Prevents balls from hitting the floor frame or back wall, reducing unpredictable ricochets..

  • Clean Professional Look: Fills the unsightly gap between the turf and the screen for a seamless, "built-in" simulator appearance.

Key Features

  • High-Density Impact Foam: Absorbs energy instantly. It’s tough enough to take a direct hit from a driver but soft enough to protect your floor and screen.

  • Perfect Geometry: The 45-degree triangle profile is engineered to deflect low shots back toward the hitting mat safely.

  • Universal Fit: Fit any simulator width or to notch around corner poles.

  • Easy Installation: Simply slide it into place. The friction-fit design stays put, or you can use the included adhesive strips for a permanent, "no-shift" setup.

Before you buy

Will this actually fit your room?

The number one reason this stuff gets sent back is that it didn't fit. Send me your measurements and I'll tell you straight — including if the answer is no. Costs nothing, and you don't have to buy it from me.

Three numbers is all I need

Width Wall to wall
Ceiling height Floor to the lowest thing up there
Depth Screen to where you'd stand

Not sure how to measure around a garage door track or a low beam? Send a photo instead — that works just as well.

Call or text (931) 278-5630

Straight to me. I work days, so evenings and texts get the fastest reply.

Send me your room and I'll check the fit

Your room

Goes straight to my inbox. No newsletter, no follow-up sequence.

Why buy it here

Same price as the big sites. Different service.

Manufacturers set these prices, so nobody is cheaper. What changes is what you get with it.

You get me, not a call center

One phone number, and I answer it. If you text me about throw distance at 9pm, you get an answer, not a ticket number.

I build these rooms myself

Ten years in construction around Clarksville. The advice you get here comes from framing these, not from reading a spec sheet.

Authorized dealer, real warranty

New stock through the manufacturer, full warranty, proper support. Not a marketplace listing from who-knows-where.

Install across Middle Tennessee

Licensed and insured, roughly 90 minutes around Clarksville. Ships anywhere in the US — install is the local part.

Outside Middle Tennessee? You still get the free room check and the honest answer. I just can't swing the hammer.

Straight answers

Questions I get asked a lot

That depends on three numbers: your ceiling height, your room width, and how far back you can stand. Send me those and I'll tell you before you spend anything. It's the most common reason gear goes back, and it's completely avoidable.

Within about 90 minutes of Clarksville, yes — I'm licensed and insured and I do the build myself. Outside that radius I'll still help you plan it and tell you what to ask a local contractor for.

Small items ship like normal parcels. Enclosures, screens and mats are made to order and ship freight, which takes longer — your delivery date shows in the cart before you pay. If you have a date in mind, order early and tell me about it.

Made-to-order screens and enclosures generally can't be returned, which is exactly why I offer the free room check first. Take me up on it. Full terms are in the Shipping & Returns tab above.

Because the manufacturers set it. Every authorized dealer sells at the same price, and anyone well below it is either grey market or not going to honour a warranty. What you're choosing between is who helps you when something goes wrong.

Usually yes — a simulator bay is a few pieces working together, and the wrong combination is where money gets wasted. Tell me what you already own and I'll tell you what's missing and what isn't worth buying.

Next step

Not sure it'll fit? That's the first thing I check.

Send me your ceiling height, width and depth. I'll tell you what works and what won't — no charge, whether you buy from me or not.

Call or text (931) 278-5630See how I build them

Dealer for The Net Return, Carl's Place and GolfBays.

Description

Foam Triangle Wedge Protection Pelmet

Finish off your simulator with the Foam Triangle Wedge Protection Pelmet

Tired of chasing stray golf balls that disappear under your impact screen? Whether you’re hitting into a high-end enclosure or a DIY setup, that small gap at the floor is a magnet for low-fliers and "worm-burners."

Foam Gap Wedge is the simple, professional solution designed to seal the perimeter and protect both your equipment and your sanity.

Why You Need It

  • Stop the Bounce-Back: Prevents balls from hitting the floor frame or back wall, reducing unpredictable ricochets..

  • Clean Professional Look: Fills the unsightly gap between the turf and the screen for a seamless, "built-in" simulator appearance.

Key Features

  • High-Density Impact Foam: Absorbs energy instantly. It’s tough enough to take a direct hit from a driver but soft enough to protect your floor and screen.

  • Perfect Geometry: The 45-degree triangle profile is engineered to deflect low shots back toward the hitting mat safely.

  • Universal Fit: Fit any simulator width or to notch around corner poles.

  • Easy Installation: Simply slide it into place. The friction-fit design stays put, or you can use the included adhesive strips for a permanent, "no-shift" setup.

Thanks for choosing Cornerstone Golf. I'm one person who loves this stuff and wants to help you do it right — whether you build it yourself or have me install it here in Middle Tennessee. Every product I carry is chosen because it works, and if you're ever unsure, just reach out. I'd rather help you find what fits than sell you what doesn't. Let's talk.